P07F0Transmission Range Multi-Function Select Circuit High
- Generic OBD-II code · Powertrain
- Turns on the check-engine light
- Can trigger limp mode
- How the car detects it
- 'Transmission Range Multi-Function Select' is the multi-bit code of the shift-by-wire selector position: each position produces a fixed pattern of sensor states, and the module checks the pattern for logic errors. Mitsubishi's 2022 CVT with electric shift uses eight sensors (R: 1–2 on, N toward R: 1–5, home: all, N toward D: 4–8, D/M: 7–8). P07F0 would be the high counterpart of P07EF: the position code reports a high state that matches no valid position, for example signal levels pulled up by a short to the supply. No manufacturer document available to us uses it – on Mitsubishi's selector 'all on' is the valid home position, so a high state cannot be told apart there. By analogy to P07EF a module would block range changes or select neutral.
- What you may notice
- Shift warning or MIL (depends on manufacturer)
- Range selection blocked or neutral
- Likely causes
- PossibleSelector signal wires shorted to the supply
- PossibleSelector faulty
- RareShift module
- Repair
- Medium · Usually a job for a workshop.Typical cost: €150 – €1,000
- Related codes
Explanation from obdex (CC0), exactly as the app shows it. Guidance only; confirm with a workshop.