P0795Pressure Control Solenoid C
- Generic OBD-II code · Powertrain
- Turns on the check-engine light
- Matters for the ITP
- Can trigger limp mode
- How the car detects it
- Pressure control solenoids are current-controlled proportional valves, and what B and C mean depends on the design: on GM's clutch-to-clutch automatics they are the pressure valves of clutches 2 and 3, on GM's CVT B is primary pulley pressure and C line pressure, on Jatco CVTs B is the secondary pressure valve, on Saab's AF40 B and C are clutch valves SLC1/SLC2. P0795 is the general code for valve C. No manufacturer document available to us uses it; GM's 8-speed uses only P0796/P0797 for its clutch 3 valve, Saab's AF40 only P0798 for valve SLC2. Sub-codes for performance, stuck on, electrical and intermittent follow (P0796–P0799).
- What you may notice
- Shift problems
- Limp mode
- Check engine light
- Likely causes
- LikelyValve body or pressure valve C
- PossibleFluid or line pressure
- RareCircuit or coil
- Inspection (ITP)
- Matters for the ITP. While the check-engine light is on, the car fails the emissions check.
- Repair
- Hard · Usually a job for a workshop.Typical cost: €200 – €3,000
- Related codes
Explanation from obdex (CC0), exactly as the app shows it. Guidance only; confirm with a workshop.