C062DABS Valves Range/Performance
- Generic OBD-II code · Chassis
- Turns on the check-engine light
- Can trigger limp mode
- How the car detects it
- C062D means the ABS valve group does not work as expected, although no single valve or plain supply fault explains it. Mitsubishi is the one maker that maps it publicly: in the 2023 Outlander PHEV brake unit, valve relay code C1048-92 shows as C062D, set within 2 s with normal supply and the system switched on, with ASC, ABS, brake lamp and MIL after one trip; bulletin 23-35-002 adds C1048-01 to the same number. Stability, traction, ABS, EBD, brake assist, hill start and electric parking brake functions are then suspended. Brake units check valves and relay with test pulses: a Tokico patent tells relay, switch and coil faults apart with a tiny test current, and MOTOR describes key-on pulse tests lasting about 65 ms.
- What you may notice
- ABS, stability control and brake warning lamps on
- Check engine lamp on (Mitsubishi)
- ABS, traction control and electric parking brake unavailable
- Likely causes
- LikelyInternal fault in the ABS control unit or its valve relay
- PossibleWeak supply through fuse, fusible link, wiring or 12 V battery
- PossibleCorroded or loose connector at the hydraulic unit
- Repair
- Hard · Usually a job for a workshop.Typical cost: €20 – €2,000
- Related codes
Explanation from obdex (CC0), exactly as the app shows it. Guidance only; confirm with a workshop.