C0010Left Front Inlet Control
- Generic OBD-II code · Chassis
- Can trigger limp mode
- How the car detects it
- Covers the left front inlet (apply) solenoid valve of the ABS hydraulic modulator. During ABS, traction or stability control the module closes this valve to isolate the left front brake circuit from the master cylinder and hold wheel pressure, then opens it to let pressure back in. The module checks the coil for opens, shorts and out-of-range resistance and monitors valve response. GM documents code C0010 (sub-type .5A) setting in the electronic brake control module of 2018-2019 Equinox, Terrain, Envision and Canyon, where it could store falsely and was under engineering review. A fault disables ABS and related functions; the red brake or amber ABS lamp illuminates and conventional braking remains.
- What you may notice
- ABS warning lamp on
- ABS and stability control disabled
- Normal braking retained
- Likely causes
- LikelyInlet valve coil open or shorted
- PossibleBrake control module fault or false setting
- RareHarness or connector corrosion
- Repair
- Workshop only · Usually a job for a workshop.Typical cost: €300 – €1,700
- Related codes
Explanation from obdex (CC0), exactly as the app shows it. Guidance only; confirm with a workshop.