B010ECamera Washer Actuator E
- Generic OBD-II code · Body
- How the car detects it
- B010E names actuator E, which may be a dedicated pump rather than a valve. Audi's TSB 2073568/1 (2024) for e-tron, e-tron S and Q8/SQ8 e-tron models reports rear camera washer pressure too low to clean the lens: the mono pump could not build enough pressure, and production moved to a dual pump (1K6 955 651) whose spare outlet is plugged. Before swapping it, technicians rule out low fluid, a clogged pump filter, low supply voltage and kinked lines. AUMOVIO lists its washer pumps with one or two outlets for 2.0 to 4.0 bar. A pump drawing no current or too much is the kind of fault a module can flag; whether any maker calls that pump E is not published, and no manufacturer documents B010E.
- What you may notice
- Camera nozzle only dribbles; the spray does not reach across the lens
- Pump hum without spray, or no pump sound at all when the wash is requested
- Likely causes
- LikelyCamera washer pump motor E worn, seized or open
- PossibleLow supply voltage or poor ground at the pump
- RareClogged inlet filter making the pump labour and draw high current
- Repair
- Medium · Often possible to do yourself.Typical cost: €40 – €250
- Related codes
Explanation from obdex (CC0), exactly as the app shows it. Guidance only; confirm with a workshop.