B010DCamera Washer Actuator D
- Generic OBD-II code · Body
- How the car detects it
- B010D covers actuator D. Audi's TSB 2059228/2 (2022) for the 2019–2022 e-tron and 2020–2022 e-tron Sportback shows what a missing check valve does to a rear camera wash: the line empties while driving or when the tailgate opens, the system stops after four activations to save fluid, and four tries are not enough to refill and pressurise it, so the lens stays dirty until the ignition (terminal 15) is switched off and on. The fix adds an inline valve, part 4N0 955 481 A. ARaymond fits such a non-return valve directly into a slim rear camera nozzle in a tailgate handle. Here the driver sees no spray but no fault code; B010D itself points to an electrical fault at actuator D, whose camera assignment is not published by any maker.
- What you may notice
- Camera wash request must be repeated several times before fluid arrives, or nothing arrives
- Reversing camera stays smeared after the wash function has been used
- Likely causes
- LikelyPump or valve D open, shorted or drawing abnormal current
- PossibleWire break where the harness flexes into the tailgate
- RarePump damaged by repeatedly running dry on an empty line
- Repair
- Medium · Often possible to do yourself.Typical cost: €20 – €300
- Related codes
Explanation from obdex (CC0), exactly as the app shows it. Guidance only; confirm with a workshop.