U0332Software Incompatibility With Multi-axis Acceleration Sensor Module A
- Generic OBD-II code · Network
- How the car detects it
- Multi-axis acceleration sensor module A measures yaw rate plus lateral and longitudinal acceleration for stability control and driver assistance; it can be a separate box or part of another controller. U0332 means a receiving controller rejects its software or variant. No manufacturer documents U0332 publicly. GM treats the unit as a programmable module in its own right: the warranty labour list has a separate operation for reprogramming it with SPS (06-08-47-001N), and after the brake controller of the 2014 Cadillac ELR was recalibrated, the yaw rate sensor learn is run in this module (recall 14087). Audi removed sporadic C051F00, a correlation fault of sensor module A on e-tron models, with new software for ABS unit J104 and suspension unit J775 (2061908). U0125 is lost contact. Stability control may switch off.
- What you may notice
- Stability control or traction control warning lamp on
- Driver assistance functions unavailable
- Code follows module replacement or software update
- Likely causes
- LikelySensor module replaced by a part with another software or variant
- PossibleBrake or suspension controller updated without matching the sensor module
- RareYaw rate sensor learn skipped after programming
- Repair
- Workshop only · Usually a job for a workshop.Typical cost: €80 – €700
- Related codes
Explanation from obdex (CC0), exactly as the app shows it. Guidance only; confirm with a workshop.