U0330Software Incompatibility With Tire Pressure Monitor Module
- Generic OBD-II code · Network
- How the car detects it
- The tyre pressure monitor module receives the radio messages of the wheel sensors, evaluates the pressures and, on many systems, works out which sensor sits on which wheel; from this it drives the warning lamp and cluster messages. U0330 is set when a partner controller finds the software or variant of this module unsuitable, usually after a replacement or a partial update. No manufacturer documents U0330 publicly. Porsche shows how much depends on that software: on Panamera and Cayenne from 2017, version 0630 could raise a TPM fault message for no reason, and the unit had to be reprogrammed and coded (90/18). FCA reflashed the TPM software of 2014–2015 Journey, Durango, Charger and Grand Cherokee when sensor location codes C151D and C1581 appeared (08-024-15). U0127 is lost contact. Only the tyre warning is affected.
- What you may notice
- Tyre pressure warning lamp or TPMS fault message in the cluster
- Tyre pressures not shown or shown on the wrong wheel
- Code appears after work on the TPMS module or a software update
- Likely causes
- LikelyTPMS module replaced or taken from another vehicle without programming and coding
- PossibleModule still on a software level that the partner controllers no longer accept
- RareModule configured for another wheel, tyre or sensor variant
- Repair
- Workshop only · Usually a job for a workshop.Typical cost: €60 – €500
- Related codes
Explanation from obdex (CC0), exactly as the app shows it. Guidance only; confirm with a workshop.