P0CCBCharge Port Door A Open Request Switch Circuit Intermittent/Erratic
- Generic OBD-II code · Powertrain
- How the car detects it
- P0CCB flags a charge flap A open request switch whose signal jumps between states without a matching press, or drops out briefly. Such signals usually come from loose terminals, a cracked solder joint in the switch or a harness that flexes with a door or body panel. No manufacturer documents this code publicly; GM's Volt tables of 2011 and 2012 cover the same switch only with P0CC7, P0CC9 and P0CCA, which use six of eight samples as a filter and would hide short dropouts. CARB 13 CCR 1968.2 (e)(15) makes intermittent checks mandatory only for emission-related inputs, so a comfort switch like this one rarely carries one. The GM charge port patent shows how the button press leads the controller to fire the flap actuator. The driver sees the flap answer only now and then.
- What you may notice
- Charge flap opens only occasionally when the button is pressed
- Fault comes and goes, often with temperature or road vibration
- Likely causes
- LikelyLoose or spread terminal at the switch or module connector
- PossibleCracked solder joint or worn contact inside the switch
- PossibleHarness damaged where it flexes with a door or panel
- Repair
- Medium · Often possible to do yourself.Typical cost: €50 – €300
- Related codes
Explanation from obdex (CC0), exactly as the app shows it. Guidance only; confirm with a workshop.