P0896Shift Time Too Long
- Generic OBD-II code · Powertrain
- Turns on the check-engine light
- Can trigger limp mode
- Needs a drive cycle to confirm a fix
- How the car detects it
- Shift time is the duration of the speed transition from the old to the new ratio, measured from input and output speed. Gearbox modules adapt fill time and pressure to keep it in a calibrated window; the code sets when adaptation is at its limit and the time is still outside. No maker could be found using these generic codes; Saab's 1994 900 automatic monitored the same with its own code P1832, a window of 0.3 to 1.3 s and a limp program. P0896 means the transition takes longer than the window: the engine flares between gears from low pressure or worn plates. Long shifts heat the clutches, so a fixed gear is a common reaction.
- What you may notice
- Delayed shifts, engine flares between gears
- Transmission warning lamp
- Limp mode in a fixed gear
- Likely causes
- LikelyLow or worn fluid, low pressure (pump, filter)
- LikelyWorn clutch plates or band
- PossiblePressure or shift valve sticking, leaking piston seals
- RareLost or reset adaptation, software
- Repair
- Hard · Usually a job for a workshop.Typical cost: €100 – €4,000
- Related codes
Explanation from obdex (CC0), exactly as the app shows it. Guidance only; confirm with a workshop.