P07FEStuck in Gear Not Specified
- Generic OBD-II code · Powertrain
- Turns on the check-engine light
- Can trigger limp mode
- How the car detects it
- P07FE is the catch-all of the 'Stuck in Gear' family: the transmission stays in a gear it was commanded to leave, but the module cannot or does not name the gear. The gear-specific codes are P072B–P073C for reverse and gears 1–7, P07D7 for 8th, P07F8 for 9th and P07FB for 10th. No manufacturer document available to us uses P07FE; the gear-specific codes are documented on dual-clutch gearboxes such as Ford's DPS6 and Maserati's MC20, whose actuators move shift drums or forks. Typical causes are a sticking shift actuator or valve, low or unstable system pressure, mechanical damage, or a faulty position or speed signal.
- What you may notice
- Transmission no longer shifts and stays in one gear
- Limp mode, transmission warning
- Likely causes
- PossibleShift actuator or shift valve sticking
- PossibleSystem pressure low or unstable
- PossibleMechanical damage in the gear train
- RarePosition or speed sensor signal wrong
- Repair
- Hard · Usually a job for a workshop.Typical cost: €150 – €4,000
- Related codes
Explanation from obdex (CC0), exactly as the app shows it. Guidance only; confirm with a workshop.