P07FCUnable to Engage Gear 10
- Generic OBD-II code · Powertrain
- Turns on the check-engine light
- Matters for the ITP
- Can trigger limp mode
- How the car detects it
- P07FC means the transmission does not reach the commanded 10th gear – the counterpart to P07FB, where 10th cannot be left. No manufacturer document available to us uses it. 'Unable to Engage' is documented only for eight-speed dual-clutch gearboxes, for example the 2020–23 Corvette (P07D8). Ten-speed planetary automatics from Ford and GM report a missing 10th gear as a ratio code (P07F7) or through valve codes; Ford's 10R140 then locks out 10th. The description follows the J2012 scheme and CARB's functional check of transmission outputs.
- What you may notice
- Gear 10 skipped or never reached, higher rpm at cruise
- Check engine and transmission warning lamp
- Jerky shifts, possibly loss of one half of a dual-clutch gearbox
- Likely causes
- LikelySticking solenoid or shift valve in the mechatronic unit
- PossibleSystem pressure too low or unstable
- PossibleAdaptives lost or wrong after software or parts work
- PossibleShift fork or synchronizer damaged
- Inspection (ITP)
- Matters for the ITP. While the check-engine light is on, the car fails the emissions check.
- Repair
- Hard · Usually a job for a workshop.Typical cost: €150 – €4,000
- Related codes
Explanation from obdex (CC0), exactly as the app shows it. Guidance only; confirm with a workshop.