P07B1Transmission Friction Element H Stuck On
- Generic OBD-II code · Powertrain
- Turns on the check-engine light
- Matters for the ITP
- Can trigger limp mode
- How the car detects it
- Each friction element (clutch or brake) has three functional codes: slip while commanded locked (P079A ff), performance/stuck off – it does not apply or applies too weakly – and stuck on – it does not release. No manufacturer document available to us uses this code; the documented hybrids have at most five monitored clutches. The description follows the family: when clutch H should release, slip stays below the expected profile. A clutch that does not release ties up the transmission, causing jolts or stalling. Slip of the same clutch is P07A1.
- What you may notice
- Check engine light or 'service hybrid system' message
- Jolt or tie-up on mode or gear changes
- Engine stalls or drags when stopping
- Limp mode with reduced power
- Likely causes
- LikelyClutch H stuck, welded or piston hanging
- PossibleValve or spool sticking in the applied position
- PossibleContaminated fluid (debris)
- RareModule software
- Inspection (ITP)
- Matters for the ITP. While the check-engine light is on, the car fails the emissions check.
- Repair
- Hard · Usually a job for a workshop.Typical cost: €200 – €4,500
- Related codes
Explanation from obdex (CC0), exactly as the app shows it. Guidance only; confirm with a workshop.