P070ETransmission Fluid Level Sensor Circuit Intermittent/Erratic
- Generic OBD-II code · Powertrain
- How the car detects it
- Fluid level sensors in the transmission sump report the oil level to the transmission module as a voltage; an Allison patent converts it to millimetres and only accepts readings with the vehicle at rest, warm fluid, low input speed and a tilt correction. Such sensors are mainly found in heavy automatic transmissions. No manufacturer document available to us uses this code. P070E means the level signal drops out briefly or jumps unrealistically – usually a loose contact or a wire breaking under movement. Sloshing and tilt also make readings vary, which is why valid measurements need the vehicle at rest. Because the oil level does not usually affect emissions directly, a rating without the check engine light is likely; expect a transmission warning or a missing level display.
- What you may notice
- Fluid level display jumps or drops out at times
- Intermittent warning message
- Likely causes
- LikelyLoose contact in transmission connector or harness
- PossibleSensor with internal contact fault
- RareContaminated or foaming fluid at the sensor
- Repair
- Medium · Usually a job for a workshop.Typical cost: €80 – €500
- Related codes
Explanation from obdex (CC0), exactly as the app shows it. Guidance only; confirm with a workshop.