P0610Control Module Vehicle Options Error
- Generic OBD-II code · Powertrain
- Turns on the check-engine light
- Matters for the ITP
- How the car detects it
- The module checks its vehicle-specific configuration for completeness and validity: at Ford the vehicle identification block or as-built data with tyre circumference, axle ratio, transmission and options; at GM the programmed vehicle options. Ford 2012 sets P0610 when one or more fields of that block are configured wrongly, the Ford diesel checks continuously within 0.5 s; GM and Saab V6 engines set it in the first trip, also for incomplete programming. Typical triggers are a new or used module without correct configuration, an interrupted reprogramming, or changed tyres or axle without updating the data. Symptoms include wrong speedometer readings or shift points and missing functions such as cruise control. The fix is rewriting the configuration or VIN-specific programming with the manufacturer's tool; replace the module only if the code returns.
- What you may notice
- Check engine light (depending on maker and variant)
- Wrong speedometer reading or shift points
- Optional functions such as cruise control missing
- Likely causes
- LikelyModule not or wrongly configured after replacement (used part, missing as-built data)
- PossibleInterrupted or faulty reprogramming
- PossibleChanged tyre size or axle ratio without updating the data
- RareInternal memory fault of the module
- Inspection (ITP)
- Matters for the ITP. While the check-engine light is on, the car fails the emissions check.
- Repair
- Medium · Usually a job for a workshop.Typical cost: €80 – €400
- Related codes
Explanation from obdex (CC0), exactly as the app shows it. Guidance only; confirm with a workshop.