P05E5Park Brake Sensor/Switch Circuit High
- Generic OBD-II code · Powertrain
- Turns on the check-engine light
- Matters for the ITP
- How the car detects it
- The engine module reads the park brake status, directly or via another module, because strategies depend on it: a parked diesel filter regeneration only runs with the park brake applied (Navistar), idle shutdown and PTO logic use it, and Ford delays an automatic restart while the electric park brake moves. CARB requires such inputs to be monitored. The only documented user of this code family is Volvo Trucks: since OBD 2021 a second park brake sensor (about 0.5 V applied, 3.5 V released) must agree with the old switch; the engine module reports the fault. No passenger car maker uses it verifiably. P05E5 means the signal is above the upper limit: open signal wire (pulled up), open sensor ground or a short to voltage; on a simple switch it resembles a released brake.
- What you may notice
- Check engine light or OBD warning (heavy-duty)
- Park brake warning in the cluster
- Parked regeneration cannot be started
- Stop-start or idle shutdown not working
- Likely causes
- LikelyOpen signal or ground wire
- PossibleConnector at the switch or sensor loose or corroded
- PossibleSensor faulty
- RareSignal wire shorted to voltage
- Inspection (ITP)
- Matters for the ITP. While the check-engine light is on, the car fails the emissions check.
- Repair
- Medium · Often possible to do yourself.Typical cost: €40 – €300
- Related codes
Explanation from obdex (CC0), exactly as the app shows it. Guidance only; confirm with a workshop.