P03F6B Camshaft Position Actuator Position Sensor C Circuit Bank 1
- Generic OBD-II code · Powertrain
- Turns on the check-engine light
- Matters for the ITP
- Can trigger limp mode
- How the car detects it
- On some engines the exhaust cam phaser (camshaft position actuator B) has its own position sensors, which tell the engine module where the phaser actually is; sensor C is the third of them, bank 1 the side with cylinder 1. This is a different family from the sliding-cam position sensors (P2C05 ff). P03F6 is the general circuit code for this sensor: the module sees an open circuit or a signal outside its valid window on the supply, signal or ground line. No manufacturer document available to us uses this code (GM, Ford and FCA tables checked); the intake counterpart P03E5 ff is equally unused. The phaser is then usually held in its base position.
- What you may notice
- Check engine light on
- Exhaust cam phasing held in its base position, loss of power
- Possibly rough idle or poorer emissions
- Likely causes
- LikelyConnector or harness to position sensor C open or corroded
- PossiblePosition sensor C faulty
- Possible5 V reference or ground disturbed
- RareEngine module
- Inspection (ITP)
- Matters for the ITP. While the check-engine light is on, the car fails the emissions check.
- Repair
- Medium · Usually a job for a workshop.Typical cost: €100 – €700
- Related codes
Explanation from obdex (CC0), exactly as the app shows it. Guidance only; confirm with a workshop.