C059DBrake Pressure Sensor D Missing Calibration
- Generic OBD-II code · Chassis
- Can trigger limp mode
- How the car detects it
- C059D flags missing calibration data for a fourth hydraulic pressure sensor. No manufacturer publishes this code. Where the letter D appears elsewhere, GM's 2016 hybrid brake controller uses it for the rear-left wheel pressure sensor (C0575–C0578), yet reports that sensor's calibration fault as C059B; the letters of the calibration codes therefore follow each maker's own list. Mitsubishi's 2023 Outlander PHEV has a comparable fault without SAE number, C105E-92 for an uncalibrated pressure sensor, detected within 1 s, and tells technicians to clear a merely stored code instead of replacing the unit. A Bosch patent describes resetting an offset fault only after a successful check while driving. Practically, the module limits ABS/ESC functions until the scan tool calibration has passed.
- What you may notice
- ABS and ESC warning lamps on
- Brake pressure based functions such as hill hold or brake blending limited
- Likely causes
- LikelyCalibration of the sensor not done after hydraulic unit or module replacement
- PossibleCode stored from an earlier event, sensor already calibrated
- RareBrake module losing calibration data in its memory
- Repair
- Workshop only · Usually a job for a workshop.Typical cost: €60 – €300
- Related codes
Explanation from obdex (CC0), exactly as the app shows it. Guidance only; confirm with a workshop.