C006BStability System Active Too Long
- Generic OBD-II code · Chassis
- Can trigger limp mode
- How the car detects it
- Set when the stability or traction control system has been intervening continuously for longer than the calibrated maximum. ESC and traction control are meant to act in short bursts; if the controller keeps modulating brakes or reducing torque beyond a time limit it concludes something is wrong, for example a persistently spinning wheel on ice, a dragging brake, a mismatched tyre or a sensor feeding a wrong signal, and stores this code while backing the intervention off to protect the hardware and avoid masking a real fault. The ABS/ESC warning lamp is set and base braking remains. Traction-control patents describe the controller overriding the driver's torque request only transiently to bring slip to target. The entry follows the SAE J2012 generic definition.
- What you may notice
- Stability/traction control cuts out
- ABS/ESC warning lamp on
- Prolonged intervention before fault
- Likely causes
- LikelyWheel spinning or slipping for a long time
- PossibleDragging brake or mismatched tyre
- RareWrong sensor input driving the intervention
- Repair
- Medium · Often possible to do yourself.Typical cost: €50 – €800
- Related codes
Explanation from obdex (CC0), exactly as the app shows it. Guidance only; confirm with a workshop.