C004FABS Control Module Over Temperature
- Generic OBD-II code · Chassis
- Can trigger limp mode
- How the car detects it
- Set when the ABS/ESC control module or its integrated pump motor reaches a temperature above the safe operating limit. Repeated or prolonged pressure modulation, for example during long downhill ABS use, frequent stability interventions or an electrical fault that keeps the pump running, heats the hydraulic unit and its motor; the module monitors an internal temperature model or sensor and stores this code to protect the hardware. It temporarily disables ABS, traction and stability control until the unit cools, then restores them. A persistent over-temperature points to a seized pump, a stuck valve causing continuous pumping or a control fault. Base braking remains and the ABS warning lamp is set while the function is suspended. The entry follows the SAE J2012 generic definition and ABS hydraulic unit thermal protection.
- What you may notice
- ABS and stability control temporarily disabled
- Function returns after cooling
- ABS warning lamp on during the event
- Likely causes
- LikelyStuck valve causing continuous pump run
- PossiblePump motor seizing or high friction
- RareProlonged heavy ABS/ESC use
- Repair
- Workshop only · Usually a job for a workshop.Typical cost: €100 – €1,800
- Related codes
Explanation from obdex (CC0), exactly as the app shows it. Guidance only; confirm with a workshop.