C0032Left Front Wheel Speed Sensor Supply
- Generic OBD-II code · Chassis
- Can trigger limp mode
- How the car detects it
- Covers the supply circuit that powers the left front active wheel speed sensor. Active sensors need a regulated voltage from the ABS/ESC module; this code is set when that supply is open, shorted to ground or to another voltage, or is outside the regulated range so the sensor cannot report a valid signal. It is distinct from the sensor-signal code C0031 in that the fault is on the feed rather than in the sensor element or its output. A fault disables ABS, traction and stability control for that corner and lights the ABS warning lamp while base braking remains. No manufacturer documents this code publicly; NHTSA reproduces the J2012 wheel speed sensor codes, with C0032 as left front supply, in its EPS safety report.
- What you may notice
- ABS warning lamp on
- ABS and stability control disabled
- No wheel speed signal from this corner
- Likely causes
- LikelyOpen or shorted sensor supply wire
- PossibleCorroded connector on the supply side
- RareModule sensor supply output fault
- Repair
- Medium · Often possible to do yourself.Typical cost: €60 – €450
- Related codes
Explanation from obdex (CC0), exactly as the app shows it. Guidance only; confirm with a workshop.