B0113Camera Washer Actuator K
- Generic OBD-II code · Body
- How the car detects it
- B0113 names actuator K. Even a working actuator is useless if the jet misses the lens. Stellantis TSB 23-049-22 Rev. A for 2022–2023 Jeep Grand Cherokee (WL) built between 13 April and 15 September 2022 found the liftgate nozzle of the digital rearview mirror camera pointing the wrong way; it is unclipped, turned 180 degrees and refitted, after which the mirror is reset by holding its plus and minus buttons for about 15 s. Bowles' application US20140060582A1 explains the geometry: a nozzle offset roughly 10 to 30 mm beside the lens, aimed within about 1 to 20 degrees of its surface and kept out of the field of view. A misaimed jet sets no code; B0113 concerns the actuator circuit, for a camera that is not published.
- What you may notice
- Camera wash does not run for the camera served by actuator K
- Digital mirror or reversing picture stays dirty after the wash is requested
- Likely causes
- LikelyOpen or short in the circuit of valve or pump K
- PossibleWire fatigue in the liftgate hinge area
- RarePlug not reconnected after the camera or nozzle was removed
- Repair
- Medium · Often possible to do yourself.Typical cost: €20 – €350
- Related codes
Explanation from obdex (CC0), exactly as the app shows it. Guidance only; confirm with a workshop.