B00F7Third Row Right Inflatable Seat Belt Deployment Control
- Generic OBD-II code · Body
- How the car detects it
- B00F7 closes the inflatable-belt block with the right seat of row three. No manufacturer documents it. The nearest real case is one row further forward: on the 2014–2016 Ford Explorer, the dealer bulletin for programme 21B11 names B141C as the right and B141B as the left second-row harness code and has technicians re-route or repair the seat pigtail when either appears. Ford's 2018 owner manual puts the rear inflatable belts in the shoulder webbing of the outboard second-row seats only; on the right of row three there are child-seat anchors but no bag. Mercedes lists beltbags for the outer rear belts of the S-Class, and Autoliv's 2002 patent shows one inflator feeding belts through a gas guide. With B00F7 present, the airbag lamp stays on.
- What you may notice
- Airbag lamp stays on after start-up check
- Right third-row inflatable belt not armed
- Safety note: never probe the inflator circuit with a test lamp; disconnect battery, wait, leave it to a specialist
- Likely causes
- LikelyChafed wires in the right rear seat harness, as seen one row forward on the Explorer (B141C)
- PossibleRestraint module variant coding expects a right third-row inflatable belt
- RareOpen or shorted igniter in the right third-row belt inflator
- Repair
- Workshop only · Usually a job for a workshop.Typical cost: €80 – €1,500
- Related codes
Explanation from obdex (CC0), exactly as the app shows it. Guidance only; confirm with a workshop.