B00C5Passenger Seat Track Position Restraints Sensor
- Generic OBD-II code · Body
- How the car detects it
- B00C5 reports a fault of the sensor that tells the restraint controller where the passenger seat sits on its rails. FCA uses the code with exactly this name. A 2022 STAR case for the 2021 Dodge Durango treats B00C5-13, circuit open, with the airbag lamp on: check the yellow 30-way plug I6634A under the passenger seat and make sure the seat track position return wire R730 is seated in cavity B11, using a pull-push-pull test. GPOP tips 68264880A and 9003579 for Dart, Cherokee and Chrysler 200 list B00C5-13 among codes to raise with engineering before an ORC is replaced, and ask for pins that are bent, corroded or opened up to be checked. Such sensors are usually two-wire Hall switches that change state when the rail passes.
- What you may notice
- Airbag warning lamp on
- Passenger airbag deployment can no longer be adapted to the seat position
- Safety note: airbag system; disconnect under-seat plugs only de-energised (ignition off, battery off, wait time), do not replace the restraint controller before checking pins, specialist workshop only
- Likely causes
- LikelyTerminal pushed back or loose in the under-seat connector (FCA Durango, R730 return wire)
- PossibleLead to the track sensor pinched or torn by the moving seat
- PossibleTrack position sensor faulty or its gap to the rail wrong after seat work
- RareRestraint controller internal fault, only after wiring and sensor are ruled out
- Repair
- Workshop only · Usually a job for a workshop.Typical cost: €60 – €400
- Related codes
Explanation from obdex (CC0), exactly as the app shows it. Guidance only; confirm with a workshop.