B0034Right Side Deployment Stage 2 Control
- Generic OBD-II code · Body
- How the car detects it
- B0034 is absent from the J2012 lists, which skip from B0033 to B0038 in the second-row block, and no carmaker or bulletin documents it publicly; the code cannot be traced to a real vehicle. The title describes a second firing stage for the right side airbag. Such bags are rare: Ford's far-side impact patent treats thorax, pelvis and head bags as single-setting because of their size, while Autoliv covers chest and pelvis with a two-chamber bag, not with two firing stages. Right front side airbags carry the J2012 code B0028; Mitsubishi, for example, checks that loop for 2 seconds before storing a fault. If B0034 is read, the module and text shown by the scan tool are what count. Airbag lamp on.
- What you may notice
- Airbag warning lamp on
- Right side airbag protection may be reduced
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed
- Likely causes
- LikelyPoor contact or corrosion at the side airbag connector or jumper harness under or in the seat
- PossibleFault in the squib loop the module assigns to this code
- RareFault or unsuitable software in the restraint control module
- Repair
- Workshop only · Usually a job for a workshop.Typical cost: €80 – €900
- Related codes
Explanation from obdex (CC0), exactly as the app shows it. Guidance only; confirm with a workshop.