C10C3ABS/ESP computer fault or configuration missing
- Renault/Dacia code · ABS / stability control
- Lights a warning lamp
- How the car detects it
- The ABS/ESP computer reports an internal fault, or that its configuration (such as the tyre-size index or other vehicle parameters) has not been programmed. A workshop with Renault-compatible software can check and program it. This meaning comes from Renault's tables for its older Bosch ABS/ESP 8.0 units; newer ABS units (for example on Logan II and Clio IV) report wheel faults under other codes. While the fault is present, ABS (and ESP, if fitted) is usually switched off; normal braking still works.
- What you may notice
- ABS (and ESP) warning light
- ABS does not work
- Likely causes
- PossibleConfiguration not programmed after the ABS unit was replaced
- RareABS/ESP computer internal fault
- Sources
- autodiag-france.com › la-liste-complete-des-codes-defaut-renault-co…
- autoxuga.com › renaultdtc50C3.html
Backed by at least two independent sources.
From Obdaryn's Renault/Dacia pack, exactly as the app shows it, with the public sources above. Guidance only; confirm with a workshop.