U2100Module configuration not completed
- Ford code · ABS / stability control
- Lights a warning lamp
- How the car detects it
- The ABS/stability control module was never given its vehicle configuration (Ford's 'as-built' data), usually because it was replaced or reprogrammed and the set-up step was skipped or interrupted. Ford's procedure is to repeat the module set-up (PMI) with a dealer-level tool. If no work was done on the module, Ford's chart treats it as no longer keeping its configuration and replaces it. Ford's ABS module and hydraulic unit (HCU) are serviced as one assembly. While the fault is active, ABS and stability control may be switched off; normal braking still works.
- What you may notice
- Some functions of the module missing or behaving as on another model
- Likely causes
- PossibleModule replaced or reprogrammed without completing the set-up
- RareModule that no longer keeps its configuration
- Sources
Backed by at least two independent sources.
From Obdaryn's Ford pack, exactly as the app shows it, with the public sources above. Guidance only; confirm with a workshop.